The inspection work that needs to be done before using the Single girder low headroom wire rope hoist

Single girder low headroom wire rope hoist is an efficient and practical lifting equipment, suitable for lifting operations in various low clearance environments. Before using the Single girder low headroom wire rope hoist, the following inspection work needs to be done to ensure its safety and reliability.

1. Check the installation status

Ensure that the gourd has been installed correctly and all fasteners are securely fastened without any looseness. Check whether the reducer of the lifting part of the Single girder low headroom wire rope hoists has been lubricated according to regulations, and whether the walking part has been lubricated with grease.

2. Electrical system inspection

Check if the electrical control box is wired according to the electrical diagram to ensure there are no wiring errors. Check the insulation status of the lifting motor and the walking motor to ensure the normal operation of the electrical system.

3. Inspection of steel wire rope

Check if the fixed end of the steel wire rope is tightened and if the plug is secure. The steel wire rope should be free of cracks and arranged neatly on the drum, without any signs of detachment from the pulley groove, disorderly twisting, or overlapping buckles. Meanwhile, ensure good lubrication of the steel wire rope.

4. Operation control check

Check if the wiring of the control button is correct, and the safety rope securing the button must be installed properly. Ensure that the ammonium button can reliably control the lifting and operation of the Single girder low headroom wire rope hoists, and the dynamic closure of the limiter is flexible and reliable.

5. Inspection of hooks and accessories

Check if the hook is painted with yellow and black zebra stripe paint, and if the hook safety device is complete. The hook stop nut should be securely fastened, and the hook should rotate flexibly in both horizontal and vertical directions.

6. Environmental inspection

Ensure that the working environment of the hoist is free of obstacles and floating objects, and that there are no foreign objects on the running track of the electric hoist. At the same time, check whether the working environment temperature and humidity of the gourd are within the allowable range.

After completing the above checks, the safety and reliability of the Single girder low headroom wire rope hoist can be ensured during use, so it is important to pay more attention when using it.